NUX MOD CORE DELUXE MKII

The NUX MOD CORE DELUXE MKII is a modulation pedal with 8 different types including ST.CH (Stereo Chorus), CE-1, SCF CHO, SCF FLG, SCF P.M., U-VIBE CHO, U-VIBE VIB and PH-100. You can switch the mod types by way of the Type rotary switch.

This pedal offers advanced signal routing with the included Send and Return. Easily split the mono signal to create customized effect loops! Additionally, you can parallel the 2 signals, and use the Tweak knob in Alt mode to blend the signals. Use the 3-way toggle switch to the desired position, and you are good to go. Keep reading below for more signal routing ideas

Shape your tone with advanced routing. Modify your tone with Modulation

ST.CH (Stereo Chorus) is inspired by the MXR® Stereo Chorus, which is beautiful sounding. We've consolidated the controls by eliminating the bass and treble knobs, now internally set at middle position, and we 've eliminated the need for the bass filter altogether, which is now automatically corrected through the advancements of Core-Image ™ sound modeling.

CE-1 is based on the legendary BOSS® CE-1 which was the first chorus effect pedal on the scene in 1976. Before that, it was only available as a built-in effect on a classic jazz amplifier. The MOD CORE DELUXE MKII exactly replicates the characteristics of this pedal; that special warmth of a rich jazz atmosphere, an immediate recognizable highlight to any musician's tone.

SCF is a tribute to the TC Electronic Stereo Chorus Flanger, one of the best modulation pedals ever made.

SCF CHO: A chorus is basically a pitch generator which mixes multiple delay signals. When the multiple delay signals are mixed with the original signal, a soft and wide sounding modulation effect is created.

SCF FLG: A flanger is based on the same principle as a chorus, although here the signal can be regenerated (like adding feedback on a delay) creating a more distinctive sounding effect.

SCF P.M.: A combination of chorus and pitch vibrato which creates a "light" chorus sound.

U-VIBE is inspired by Dunlop® Uni-Vibe® for its stunningly unique sound. Old-school Uni-vibe delivered a huge 3D sound by simulating the physical Rotating Speaker Effect; that beautiful and unforgettable sound easily associated with Hendrix’s bending facial expressions during his 60s stage performances.

U-VIBE CHO: Depth will change the depth of the sweeping effect.

U-VIBE VIB: Depth will change the degree of pitch modulation.

PH-100 is based on the MXR® PHASE 100 which has both a Speed control and a 4-waveform Intensity control, the Phase 100 offers a broad range of tones.

*All of the brand and model names mentioned on this page are Trademarks of their respective owners, which are in no way associated or affiliated with NUX Effects and Cherub Technology CO. LTD.

An Intuitive User Interface

Adjusts the modulation speed.

Adjusts the modulation sweep range.

Selects the type of modulation.

Note: PH-100’s original reference only has 2 parameters, so the Tweak knob has no function in PH-100 model.

In ST.CH / CE-1 / SCF CHO / SCF FLG / SCF P.M. / U-VIBE CHO / U-VIBE VIB modes, Tweak knob adjusts the mix level of modulation. In PH-100, the Tweak knob has no function as the original reference doesn’t have a mix signal.

The Tweak knob also acts as a Blend knob while in Alt mode. To access this set the toggle switch to the // (parallel) position. You can now press and hold the footswitch to enter Alt mode. Now, the Tweak knob becomes Blend function to adjust the mixing rate of Modulation effect signal and Send/Return signal. (Counterclockwise gets more Send/Return signal, clockwise gets more Modulation signal.)

DEPTH knob

Toggle switch

Note: The toggle switch only works in advanced routing setups. For normal routing, the toggle switch has no function. Keep reading below for examples of advanced routing setups.

Toggle the switch to desired position to choose the signal routing.

PRE means Modulation effect goes before the Send/Return loop.

// (Parallel) means Modulation effect and Send/Return loop are parallel.

Footswitch & FS Indicator

Press once to engage/disengage the effect. Press twice, it will activate the Smart Tap Tempo feature. The Rate is related to tap tempo. (The FS indicator will flash as current BPM.)

While the effect is engaged, the FS indicator will show “Red”. While the effect is disengaged, the FS indicator will turn off.

Note: The tap tempo range is 50~200 BPM.